|
Cutting
and
creasing is the initial process carried out in the manufacture of a
corrugated box. It is simultaneously carried over this machine. Two
pairs of shafts have creasing and cutting heads mounted on them which
can be easily set as required. Depending upon the thickness of board
3ply, 5ply, 7ply or 9ply, separate creasers are to be used. The
sheets are piled separate creaser are to be used. The sheets are piled
on the feed table and fed through the machine by hand.
Motor
H.P. |
Min
Distance between two creasers (in Inch) |
Sheet
sizefed Min. Max. (in Inch) |
Floor
Space (in feet) |
| 1.5 |
4 |
15 |
65 |
3X7 |
| 1.5 |
4 |
15 |
75 |
3X8 |
| 2.0 |
4 |
15 |
85 |
3X9 |
| 3.0 |
4 |
15 |
95 |
3X10 |
| 3.0 |
4 |
15 |
105 |
3X11 |
|
